BM JACK 1: Glass cutting automat

BM JACK 1: Glass cutting automat

BM-Jack 1 is designed for dec­o­ra­tion of glass arti­cles. In fact, this machine brings a brand new inno­va­tion in glass cutting dec­o­ra­tion. So far, the machine glass cutting has never been so close to the manual glass cutting dec­o­ra­tion. The indi­vid­ual machine axes can move with ser­vo­mo­tors. In total, there are seven ser­vo­mo­tors mounted in the machine. The cutting wheel is driven with an asyn­chro­nous motor. An elec­tric switch­board with all nec­es­sary elec­tric com­po­nents used to control the machine is a part of the machine too.
Key frea­tures: Modular system based on soft­ware upgrades.
Full auto­matic operaiton so close “hand made” glass dec­o­ra­tion.
The flex­i­ble element can be inte­grated with a “soft server” that can control the working push pro­por­tion­ally. There are the fol­low­ing advan­tages com­pared to the pneu­matic working push: Cross­cut­ting check — the machine stores the depth of the first cut and adjusts the depth of the remain­ing cuts in rela­tion to this. The cutting tool moves in the cut much more smoothly, there­fore it’s pos­si­ble to use higher cutting speed.

There is a touch-screen on the front side of the machine at which you can adjust some para­me­ters nec­es­sary to tune up the cutting program. The cutting program uses a design soft­ware. You can get this soft­ware in the fol­low­ing way: Pur­chase from Horus, File gen­er­a­tion accord­ing to customer’s wishes — this is con­ve­nient in the case of repeated orders, or upgrad­ing of an older Horus or Wincut program.The design soft­ware gen­er­ates a data file that is sub­se­quently loaded in the machine PC (sit­u­ated in the machine switch­board). The machine com­puter repeat­edly con­trols the whole cutting process then.
When cutting with more machines, just one design soft­ware is suf­fi­cient. It gen­er­ates the data files for indi­vid­ual machines, e.g. dif­fer­ent pat­terns can be cut at each posi­tion. This auto­matic machine is eco­nom­i­cal for as small batch as 60 — 100 article pieces.
The data files can be loaded from the design soft­ware using the fol­low­ing way – network data trans­fer, flash disc, CD, DVD or wire­less data trans­fer.
The whole machine space demand does not exceed that of a single glass­cut­ter. The machine is equipped with a closed cooling water circuit and water con­sump­tion is about 1000 litres a month. After adjust­ment, even an unqual­i­fied person can operate the machine. However, adjust­ment of the machine and the program main­te­nance should be per­formed by a qual­i­fied person and our company is ready to provide the train­ing for your per­sonal.

Length of the machine incl. control cabinet
2250 mm
Width of the machine
600 mm
Height of the machine
2250 mm
Machine weight
750 kg
about 1 – 10/minute, depend­ing on the pattern
Maximum product diam­e­ter
420 mm
Maximum product height
350 mm
Product weight
up to 4 kg (accord­ing to customer’s wishes)
Product shape
rotary (non-rotary and flat coming soon)
vacuum or mechan­i­cal (pneu­matic)
Installed input
6,5 kW
Average input
2 kW
Control medium
vacuum (the vacuum pump is not included, input 0.8kW)
Maximum wheel diam­e­ter
150 mm
Wheel rev­o­lu­tions
200‑6000 rpm
Number of cutting wheels
1 (3)
Cooling medium
water with emul­sion

Optional equipment

(not included in the machine basic price):

  • Upon request, the machine can be fitted with a three-posi­tion revolv­ing head that enables to fix three dif­fer­ent working tools. The tools are exchanged in accor­dance with the program depend­ing on the cut that is cur­rently being processed. The tool exchange is auto­matic
  • Upon request, the machine can be deliv­ered with a vacuum pump used for clamp­ing prod­ucts
  • Cen­trifu­gal con­tin­u­ous water treat­ment unit
  • Design (drawing) program Horus
  • Various diamond tools
  • Various clamps to fix the prod­ucts